PolyQuip designs and builds metered dispense systems for pneumatic overlay and epoxy polymer concrete volumetric and batch plant trucks and trailers. Built for bridge-deck overlay and infrastructure contractors. Every rig records what it put down.
The controls on a PolyQuip rig do more than run the pumps. The PLC writes down what the machine did and where it was when it did it, and the rig sends that home over cellular. The owner sees every pass and every batch without waiting on paperwork from the field.
Loading the sample map… Tap a point to see its row, or a row to find it on the map. Coloured by job; grey is pumps off.
The PLC logs as the rig runs: one row a minute on a pump trailer, a row every 100 feet of travel on an automatic trailer, one line per batch on the batch plant. Each row carries the GPS position, so the record shows where the material went, not only how much.
Customers sign in to the PolyQuip portal. Each machine page is a map and a table of the same rows, linked both ways, like the sample above. Pick a day or a range, choose the columns, and download.
Each machine can send a production report for the 6 AM to 6 AM day. The customer chooses who gets it, from the office to the field, and which columns it carries. The same map and table as the portal, as attachments.
Rows from a real epoxy polymer concrete overlay pour, job details removed. One line per batch, written by the plant.
| Batch | Size (cu ft) | Rock (lb) | Sand (lb) | Epoxy (gal) | Resin % | Ratio check |
|---|---|---|---|---|---|---|
| 22 | 12 | 448 | 896 | 18.00 | 11.61% | 0.00% |
| 23 | 12 | 448 | 896 | 17.99 | 11.60% | 0.00% |
| 24 | 12 | 448 | 896 | 17.99 | 11.60% | 0.00% |
| 25 | 12 | 448 | 896 | 17.98 | 11.59% | 0.00% |
| 26 | 12 | 448 | 896 | 17.99 | 11.60% | 0.00% |
When an inspector asks what went down on a pour, the answer is a printout, not a memory.
Wear parts and replacement components for PolyQuip systems. Tell us the machine and the part, and we will match it to your build. Ordering is by request for now.

Stand-mounted gear pump on a variable-speed drive for moving A or B material from totes into the dispensing tanks. Stainless enclosure, lockable disconnect, speed control and fault reset at the panel.
Request this part
2 inch NPT immersion heater with stainless elements and a line-duty thermostat, for keeping epoxy at working temperature in totes and tanks.
Request this part
Dispense valve with an on/off pump sensor, built to mount on the dispense whip. Complete assemblies and spares.
Request this part

3 inch hose for aggregate and 2 inch hose with cam-lock connectors for epoxy, from the tanks to the pumps.
Request this part

Digital meters for the A and B lines, with running totals at the meter.
Request this part
Measures total gallons and ratio. Can be put in line on any system.
Request this part
Sensors and electrical components in stock.
Request this part

PLC modules, touchscreens, drives and power supplies for PolyQuip cabinets, matched to how your machine was built.
Request this partWe connect to your machine's PLC over cellular and work with your operator on the phone.
Send us a message and we will get back to you.